After meeting the owners of Miniature Crush and taking a tour of their facility, I approached them with an offer to become a content creator for them.

We’re still not precisely sure how that is going to work, but for now they have sent me an unfinished piece of furniture to see what I can do with it as a sort of trial run.  This blog post is written with Miniature Crush customers in mind.  They may not be familiar with the products and techniques I use, so it may seem a bit overly detailed for some of my long-time readers who are already familiar with things like chalk style paint and transfers.

This is the 1:12 scale Blanket Cabinet and it sells for $20.99.

The top doors open to reveal some shelving inside.

As you can see above, this piece comes with the drawer pulls and knobs already in place.  But I wanted to paint it, without painting the hardware.  So I used a razor blade to gently get behind those pulls and pop them off, taking care not to bend them.

Then after giving the cabinet a light sanding with a 220 grit sanding sponge, I gave it a base coat of Dixie Belle Paint Co’s Coffee Bean.

The purpose of this base coat of paint is to provide a color to add some dimension when I later sand my final color to distress it.  I didn’t need to get perfect coverage with that first coat.

I followed that up with a couple of coats of Dixie Belle’s Cottage Door, a beautiful coral/pink.

If you aren’t familiar with Dixie Belle paint, it is a chalk mineral paint which is why it looks quite flat at this point.  Although it doesn’t technically require a top coat for durability, a top coat will add some sheen to the paint and also protect it from dirt and moisture.  Personally I prefer working with a chalk style paint because it distresses really nicely in miniature.  I do water my chalk paint down just a bit to reduce brush strokes which also helps a miniature piece look more realistic.

Once the Cottage Door paint was dry, I sanded it lightly with the 220 grit sponge again to distress those edges.

You can just see a hint of that dark brown Coffee Bean color.

Next up I pulled out the Iron Orchid Designs gilded transfer set called Etiquettes.  I cut out various bits and pieces from that to fill in the recessed sections of those upper doors.

Now you can see why I wanted to keep that hardware in its original gold color.  I knew it would play well with the gilded transfer.

If you aren’t familiar with transfers, they are also called rub-on’s or rub-on transfers.  Wikipedia does a good job of describing them:  “Dry transfers (also called rub-ons or rubdowns) are decals that can be applied without the use of water or other solvent. The decal itself is on a backing material such as paper or plastic sheeting much like a transparency. The dry transfer is placed in the desired location with the backing side up. The decal is then applied by burnishing the backing with a stylus or similar object such as a ballpoint pen. The contact side of the decal includes a pressure-sensitive adhesive; the combination of heat and pressure causes the decal to stick more strongly to the new surface than to the backing. When the backing is removed, the decal remains. This allows for ink only where needed even if the pattern is delicate, because the backing supports the decal while it is being applied.”

Once I had the gilded transfers in place, I re-attached the knobs and drawer pulls using some super glue.  Then I added a top coat of Dixie Belle’s clear wax over the entire exterior of the blanket cabinet.

You have a number of different top coat options available when using a chalk style paint.  I personally like a buffed wax finish for it’s subtle sheen and because it deepens the color ever so slightly.  But you could also choose to use a water based top coat meant for use over chalk paint.  Dixie Belle, for example, has a flat, a satin and a gloss water based clear coat.

One important note, be sure to apply your transfers and/or glue on any hardware before applying wax.  Those items won’t stick very well to a waxed surface.

Now for the inside of the cupboard.  I started by painting it in Dixie Belle’s Drop Cloth, which is a very warm white.  Then I pulled out the Worn Wallpaper Scraps by Tim Holtz.  This is a little packet of 5″ x 8″ sheets of faded, worn floral wallpaper designs.  They are perfect for lining miniature cupboards.  Of course, you could also use any of the dollhouse wallpapers from Miniature Crush for this as well.

One 5″ x 8″ sheet was just enough paper to line the back and the shelves of this blanket cabinet.  I cut pieces of the paper to size, and then used some Mod Podge to adhere them to the cabinet.

I also had enough left over to line the drawers too.

It’s so much fun to see what you can do with these unfinished pieces.  Be sure to check out the complete inventory of them at Miniature Crush.

I’m adding this piece to my ‘miniatures for sale‘ page because I don’t have a spot for it in my own dollhouse.  I am willing to ship my miniatures and can accept Venmo or PayPal payment for them, so be sure to check that out if you’re interested!